KX132-1211
|
Tri-axis 16-Bit Accelerometers, supporting ranges from ±2G TO ±16G, digital (I²C/SPI) output, advanced data path, advanced wake-up/back-to-sleep engine, FIFO buffer, -40°C to +105°C operating temperature range in a 2x2x0.9MM LGA 12-PIN - KX132-1211 |
Active |
±2g, ±4g, ±8g, ±16g User-selectable |
16384, 8192, 4096, 2048 (16-bit), (counts/g) |
130 |
16-bit |
2 x 2 x 0.9 mm LGA:12 Pin |
SPI /
Digital
(I2C) |
512 Byte |
-40 to 105 |
1.7 to 3.6 |
0.5 to 162 |
 |
Product Overview KX132-1211 |
| The KX132-1211 is a tri-axis ±2g, ±4g, ±8g, ±16g silicon micromachined accelerometer featuring a user-configurable 3 stage Advanced Data Path (ADP) consisting of a low-pass filter, low-pass/high-pass filter, and RMS calculation engine. The new KX132-1211 accelerometers also feature advanced Wake-Up and Back-to-Sleep detection with a high-resolution threshold capability configurable down to 3.9mg, 512-byte buffer that continues to record data even when being read, and embedded engines for orientation, Directional-TapTM/Double-TapTM, and Free fall detection. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device wafer. A separate ASIC device packaged with the sense element provides signal conditioning and intelligent user-programmable application algorithms. The new KX132-1211 accelerometers offer lower noise and improved linearity over of the entire temperature range. The accelerometer is delivered in a 2 x 2 x 0.9 mm LGA 12-pin plastic package operating from a 1.7V – 3.6V (VDD) / 1.2V-3.6V (IO_VDD) DC supplies. Internal voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics even if the supply voltage changes. I²C or SPI digital protocol is supported to configure the chip, read acceleration outputs, and check for updates to the orientation, Directional-TapTM/Double-TapTM detection, Free fall detection, and activity monitoring algorithms. Two configurable interrupt pins are also available to show the output of the embedded detection algorithms. |
|
• Advanced Data Path with user configurable 3 stages consisting of a low-pass filter, low-pass / high-pass filter, and RMS engine.
• High Temperature Range -40°C to +105°C
• Integrated Free fall, Directional-Tap/Double-Tap™, and Device-orientation Algorithms
• Advanced Wake-Up and Back-to-Sleep detection with high-resolution threshold configurable down to 3.9mg
• Embedded 512-byte FIFO buffer with capability to record data even when being read
• User-selectable Output Data Rate up to 25600Hz
• User accessible manufacturer and part ID registers |
XYZ |
|
|
|
| Yes |
|
|
|
|
KX134-1211
|
Tri-axis 16-Bit Accelerometers, supporting ranges from ±8G TO ±64G, digital (I²C/SPI) output, advanced data path, advanced wake-up/back-to-sleep engine, FIFO buffer, -40°C to +105°C operating temperature range in a 2x2x0.9MM LGA 12-PIN - KX134-1211 |
Active |
±8g, ±16g, ±32g, ±64g User-selectable |
4096, 2048, 1024, 512 (16-bit), (counts/g) |
300 |
16-bit |
2 x 2 x 0.9 mm LGA:12 Pin |
SPI /
Digital
(I2C) |
512 Byte |
-40 to 105 |
1.7 to 3.6 |
0.5 to 162 |
 |
Product Overview KX134-1211 |
| The KX134-1211 is a tri-axis ±8g, ±16g, ±32g, ±64g silicon micromachined accelerometer featuring a user-configurable 3 stage Advanced Data Path (ADP) consisting of a low-pass filter, low-pass/high-pass filter, and RMS calculation engine. The new KX132-1211 accelerometers also feature advanced Wake-Up and Back-to-Sleep detection with a high-resolution threshold capability configurable down to 15.6mg, 512-byte buffer that continues to record data even when being read, and embedded engines for orientation, Directional-TapTM/Double-TapTM, and Free fall detection. The sense element is fabricated using Kionix’s proprietary plasma micromachining process technology. Acceleration sensing is based on the principle of a differential capacitance arising from acceleration-induced motion of the sense element, which further utilizes common mode cancellation to decrease errors from process variation, temperature, and environmental stress. The sense element is hermetically sealed at the wafer level by bonding a second silicon lid wafer to the device wafer. A separate ASIC device packaged with the sense element provides signal conditioning and intelligent user-programmable application algorithms. The new KX134-1211 accelerometers offer lower noise and improved linearity over of the entire temperature range. The accelerometer is delivered in a 2 x 2 x 0.9 mm LGA 12-pin plastic package operating from a 1.7V – 3.6V (VDD) / 1.2V-3.6V (IO_VDD) DC supplies. Internal voltage regulators are used to maintain constant internal operating voltages over the range of input supply voltages. This results in stable operating characteristics even if the supply voltage changes. I²C or SPI digital protocol is supported to configure the chip, read acceleration outputs, and check for updates to the orientation, Directional-TapTM/Double-TapTM detection, Free fall detection, and activity monitoring algorithms. Two configurable interrupt pins are also available to show the output of the embedded detection algorithms. |
|
• Advanced Data Path with user configurable 3 stages consisting of a low-pass filter, low-pass / high-pass filter, and RMS engine.
• High Temperature Range -40°C to +105°C
• Integrated Free fall, Directional-Tap/Double-Tap™, and Device-orientation Algorithms
• Advanced Wake-Up and Back-to-Sleep detection with high-resolution threshold configurable down to 15.6mg
• Embedded 512-byte FIFO buffer with capability to record data even when being read
• User-selectable Output Data Rate up to 25600Hz
• User accessible manufacturer and part ID registers |
XYZ |
|
|
|
| Yes |
|
|
|
|
KXTJ3-1057
|
Tri-axis, user selectable ± 2G, 4G, 8G, 16G, digital (I²C) interface and motion detection/wake-up/interrupt, 2x2x0.9mm LGA - KXTJ3-1057 |
Active |
±2g, ±4g, ±8g, ±16g User-selectable |
1024 (14-bit), 64, 32, 16 (8-bit), 1024, 512, 256 (12-bit), (counts/g) |
150 |
8-bit, 12-bit, 14-bit |
2 x 2 x 0.9 mm LGA:12 Pin |
Digital
(I2C) |
- |
-40 to 85 |
1.71 to 3.6 |
10 to 155 |
 |
Product Overview KXTJ3-1057 |
| The KXTJ3 is the next generation of our best-selling KXTJ2 tri-axis accelerometer that provides the best value and high performance available in the same pin-to-pin compatible 2 x 2 x 0.9 mm 12-pin LGA package. New and improved is an extended g-range up to ±16g, higher resolution embedded wake-up function down to 3.9mg, and more flexible interrupt circuitry. The KXTJ3 sense element offers lower noise performance, exceptional shock resiliency, stable performance over temperature, and virtually eliminates offset and sensitivity shifts from reflow. |
|
• Excellent value with low cost/high performance ratio
• Extended 16g-range
• Low noise
• High resolution wake-up function |
XYZ |
|
|
|
| Yes |
|
|
|
