Gas Sensors
Oxygen Sensors
|
Oxygen Module
Our Oxygen Sensor Modules feature high accuracy, long life (more than three years in normal air, continuous calibration and maintenance is not required. Calibration gas is not required. From ppm to 95% O2 wide measurement range. No interference to media and no pressure dependence.
These Oxygen Modules are suitable for a wide variety of applications including: Oxygen concentrators, nitrogen purifiers, alarms for oxygen shortage, culture oven ro incubators, combustion control and soldering systems.
|
T6703 CO2 Module
T6713 CO2 Module
|
T6700 CO2 Module Series
The new miniature Telaire® T6700 NDIR CO2 Module Series is an affordable gas sensing solution,designed to enable OEMs to integrate it into smaller enclosures and equipment. It uses significantly less power than many other devices on the market. There are currently two models available within the series:
The Telaire T6713 CO2 Module is ideal for applications where accurate CO2 levels need to be measured and controlled for indoor air quality and energy saving applications, such as demand control ventilation.
The Telaire T6703 CO2 Module is optimised for applications where CO2 levels need to be measured to make assessment of indoor air quality in residential applications.
All units are factory calibrated to measure CO2 concentration levels up to 5000ppm, while maintaining accuracy across the range.
|
T6613 CO2 Module
Dev Kit User Manual
|
T6613 CO2 Module
The Telaire® 6613 CO2 Module is designed to meet the volume, cost and delivery expectations of Original Equipment Manufacturers (OEMs). This lifetime calibration, ABC logic module for non continuous occupancy is ideal for customers who are familiar with the design, integration and handling of electronic components.
All units are factory calibrated to measure CO2 concentration levels up to 2000 and 5000 ppm. Telaire® dual channel sensors are available for higher concentrations.
|
T6615 CO2 Module
Dev Kit User Manual
|
T6615 CO2 Module
The Telaire® T6615 Sensor Dual Channel CO2 Module is designed to integrate into existing controls and equipment. This continuous occupancy module has been created to meet the volume, cost and delivery expectations of Original Equipment Manufacturers (OEMs).
This is a reliable sensor design, based on 15 years of engineering and manufacturing expertise. The flexible CO2 sensor platform interacts with other microprocessor devices.
|
T6500 CO2 Threshold Switch
|
T6500 CO2 Threshold Switch
The Telaire® 6500 series module is a low-cost CO2 threshold sensor designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEM). The module is ideal for customers who are familiar with the design, integration and handling of electronic components but do not wish to invest resources in their own development effort.
|
For further information on Gas Sensors contact Willow: +44 (0) 1342 717102
|