For more information about each sensor click on the name or its picture
CXTD
SOLID-STATE, PRECISION DIGITAL INCLINOMETER AND DIGITAL 3-AXIS ACCELEROMETER
The CXTD is a rugged high performance digital inclinometer. It features 180 degree measurement range and high resolution. The inclinometer module is ideal for accurate pointing and level measurement applications. The CXTD device can also be used as a digital 3-axis digital accelerometer, the unit funds application in seismic monitoring.
Download CXTD Digital Tilt & Acceleration Sensor Data sheet (PDF)
CXTILT02EC
SOLID-STATE, ENHANCED DIGITAL INCLINOMETER
The CXTILT02EC is a highly accurate, dual-axis, digital inclinometer. It employs Crossbow's Soft Sensor® calibration and on-board temperature sensor to internally compensate for temperature induced drift. It adds linearization calibration to achieve the extremely high-linearity needed for high performance applications like those in construction environments. The CXTILT02E is the same as CXTILT02EC but lower accuracy. The CXTILT02E and EC are ideal for military and heavy industrial applications. Example applications include measuring the tilt of bridges and roads and pointing systems.
Download CXTILT02EC Enhanced Digital Inclinometer Data sheet (PDF)
CXTA01 / CXTA02
ANALOG TILT SENSOR, SINGLE / DUAL AXIS
The CXTA01 and CXTA02 are single and dual axis tilt sensors with an easy-to-use fully signal conditioned 0-5V analog output. Angle measurements can be made up to 75 Degrees in tilt range. The zero-angle voltage and sensitivity are stable over the lifetime of the device. The sensor works with unregulated power supply inputs of 8 to 30 VDC and is available in plastic and high-temperature metal housing.
The CXTLA01 and CXTLA02 are similar in design to the standard CXTA Series sensor, with the exception of a special low range sensing element. The MEMS element is tuned for fine inclination measurements. The full sensor range is +/- 20 Degrees, with highly sensitive 100 mV/Degree analog output.